

Introducing the very latest in Front Loader technology The all new FZ Front Loaders from Stoll

	Radical New Parallel Lifting System This unique design, combined with the finest grade materials has resulted in dramatically improved lifting performance (now achieving up to 3 tonnes and 5 meter lift)
			FZs Radical New System The new FZ Front Loader uses a unique and radical paralleling system for greatly improved lifting performance, a very tidy clean look and greatly increased driver visibility. The parallel system automatically keeps the bucket at your required angle during the entire lift. Increased functionality without the normal large steel beams that otherwise obscure the operators view. Hover your mouse over the picture to see a diagram of this radical new design from Stoll.
	This latest design exploits all of the advantages of modern engineering and manufacturing techniques that allow the second beam to be entirely embedded within the framework of the outer one. This has been achieved by the use of high quality, fine grain steel throughout, resulting in a smaller box section as the primary beam with a substantial cast steel member providing the second of the paralleling partners. Click here for further details
	Exceptional Versatility The Addition of hydraulic rams to parallel the front beams provides the operator with manual control over an otherwise fully automated parallel lift.
			All the benefits of automatic parallel lifting with all of the flexibility of hydraulic control By cleverly combining fixed parallel lifting design with hydraulic control, Stoll have achieved a superbly flexible system; offering the operator all of the benefits of a straight parallel lift (keeping the bucket at the correct angle throughout the reach) plus the additional ability to further tilt and control the angle of the bucket (or other attached accessory). Hover your mouse over the picture to see a diagram of this radical new design from Stoll.
	Click here for further details
	Dramatically Improved Visibility By placing the parallel beam within the main beam, Stoll have dramatically improved the visibility for the driver/operator.
	Whereas older style parallel lift front loaders have always suffered from huge cumbersome and unwieldy beams obscuring the drivers view the modern technology of the new Stoll FZ series offers a state of the art transition away from this earlier approach. The result of this innovative design results in a much clearer working view around the front and sides of the tractor, and as illustrated in the picture above a safer and more productive working environment. Click here for further details
	Pipe-work Protected in Beams with Inspection Panels for Access Pipe-work for hydraulics is embedded in the structure of the main beams, with removable inspection panels allowing quick and easy access for maintenance.
			Protected Pipe-work is Readily Accessible Pipe-work is mostly all protected within the main lifting beams. Unlike most designs, where this results in maintenance and inspection becoming a major issue, Stoll have cleverly positioned all pipe-work below inspection panels and all is readily accessible. Hover your mouse over the picture to see a diagram of this radical new design from Stoll.
	Click here for further details
	Appliance - Quick Release Attached appliances may be quickly and easily changed via the simple, yet robust and secure, quick release mechanism
			Appliance Quick Release Mechanism - Allows attached appliances to be quickly and easily interchanged by the operator.
	Click here for further details
	Robust and Practical Storage Stand Minimal footprint on your valuable floor space, whilst loader detached
			Integral Storage Stand requires minimal floor space whilst loader is dismounted. The integral folding floor stand is permanently attached to the loader, so it is always available to allow the loader to be safely parked when detached. In storage, the stand keeps the loader available, ready for immediate connection, whilst occupying the absolute minimum of valuable floor space.
	Click here for further details
	Hydraulic Attachment Storage Conveniently located storage plate, allows hydraulic connectors to be tidily and securely stowed when not in use
			The Hydro-Fix facility allows the connection of secondary hydraulic accessories to the appliance end of the front loader. The Stoll system has the advantage of a safe and secure locking plate, located behind the appliance, protecting the hydraulic connectors from damage whilst they are stowed. The dual locking system also provides considerable ease of use and makes the Stoll system one of the most versatile available.
	Click here for further details
	Manufactured from Fine Grain Steel Reduces corrosion and provides dramatically greater beam strength Now able to lift up to 3 tonnes! With a lifting height of 5 meters! See the all NEW Stoll FZ Front Loader at Grassland & Muck 2008 - Stand 417 Click here for further details

Introducing the very latest in Front Loader technology The all new FZ Front Loaders from Stoll

Radical New Parallel Lifting System

This unique design, combined with the finest grade materials has resulted in dramatically improved lifting performance (now achieving up to 3 tonnes and 5 meter lift)

FZs Radical New System

Hover your mouse over the picture to see a diagram of this radical new design from Stoll.

Exceptional Versatility

The Addition of hydraulic rams to parallel the front beams provides the operator with manual control over an otherwise fully automated parallel lift.

All the benefits of automatic parallel lifting with all of the flexibility of hydraulic control

Hover your mouse over the picture to see a diagram of this radical new design from Stoll.

Dramatically Improved Visibility

By placing the parallel beam within the main beam, Stoll have dramatically improved the visibility for the driver/operator.

Pipe-work Protected in Beams with Inspection Panels for Access

Pipe-work for hydraulics is embedded in the structure of the main beams, with removable inspection panels allowing quick and easy access for maintenance.

Protected Pipe-work is Readily Accessible

Hover your mouse over the picture to see a diagram of this radical new design from Stoll.

Appliance - Quick Release

Attached appliances may be quickly and easily changed via the simple, yet robust and secure, quick release mechanism

Appliance Quick Release Mechanism - Allows attached appliances to be quickly and easily interchanged by the operator.

Robust and Practical Storage Stand

Minimal footprint on your valuable floor space, whilst loader detached

Integral Storage Stand requires minimal floor space whilst loader is dismounted.

Hydraulic Attachment Storage

Conveniently located storage plate, allows hydraulic connectors to be tidily and securely stowed when not in use

Manufactured from Fine Grain Steel

Reduces corrosion and provides dramatically greater beam strength

Now able to lift up to 3 tonnes! With a lifting height of 5 meters!

Introducing the very latest in Front Loader technology

The all new FZ Front Loaders from Stoll

This unique design, combined with the finest grade materials has resulted in dramatically
improved lifting performance (now achieving up to 3 tonnes and 5 meter lift)

By placing the parallel beam within the main beam,
Stoll have dramatically improved the visibility for the driver/operator.

Pipe-work for hydraulics is embedded in the structure of the main beams,
with removable inspection panels allowing quick and easy access for maintenance.

Attached appliances may be quickly and easily changed
via the simple, yet robust and secure, quick release mechanism

Conveniently located storage plate, allows hydraulic connectors to be
tidily and securely stowed when not in use

Now able to lift up to 3 tonnes!
With a lifting height of 5 meters!